Thank you for that question—you have given me the opportunity to say what I really wanted to say. I hope that the convener will be firm with me if I get too carried away. Very large ferries appear to be serviced very well, so I will ignore them. There is no problem there because the amount of money rolling around to operate very large ferries means that, by now, all or most of the terminals have been upgraded to standards whereby the slope of the walkway is of acceptable tolerance for people with walking difficulties and wheelchair users.The difficulties arise with the smaller ferries. The very smallest ones, which I mentioned, sometimes require people to get on and off via steps. You can imagine that that is very difficult for somebody who is in a wheelchair, bearing in mind that the steps are covered with seawater and sometimes seaweed. In exposed locations such as Orkney, it is likely that a gale will be blowing, too. It is also dark at 4 o'clock in the afternoon when people get off the ferry. A number of factors do not make access easy.A big group of ferries that has not yet been dealt with are the middle-sized ferries, which are connected to the shore by one of two systems. The first is a linkspan, which is tide dependent, and moves up and down to provide a reasonable slope so that cars can drive on and off. A solution for people with mobility difficulties is to take them on to the ferries by the linkspan. The system is very common; every ferry in Orkney that does not have foot access by steps uses a linkspan. There is no guidance in the book on linkspan health and safety issues, which can be serious if large lorries are reversing off ferries and people are walking on to them.In my locality, the matter has been dealt with by having a clear company policy that nobody walks anywhere near the ferry while vehicles are moving. The policy should be included in the guidance, but that does not necessarily happen. I know of other operators who are a bit slacker about access in such circumstances and assume that people will look after themselves. However, that policy alone does not solve the problem. Because of the road surface and where the linkspan joins the boat, it is common to have quite big gaps as a result of hinges and holes in the deck that things are fixed to. Getting over those can be quite problematic, particularly for people who have walking difficulties or who use an aid such as a walking stick, or for those who have visual difficulties. Those surfaces were made for rolling cars on and off, not for human beings, and are therefore unsatisfactory.The next type of ferry, which is still quite common, is called a hard-ramp ferry. Hard ramps are used in Orkney and Shetland, and for the smaller ferries in the Western Isles. A hard-ramp ferry uses a landing craft-type vessel, which comes up to the hard ramp and then lowers a ramp off the back of the ferry on to the hard ramp. The difficulty is that for technical marine reasons, the ramp has to be much steeper than is acceptable for somebody who walks with a stick or any sort of aid, or who uses a wheelchair. I think that the ratio of the ramp has to be roughly 1:4, because of how the boat is designed. If the ramp were not that steep, the boat could not come alongside and make use of it. The steepness is a design principle of that style of boat.The trouble is that a disabled person is faced with a massive slope of rough concrete with water and seaweed slopping around on it, down which they have to go without a handrail or any assistance whatsoever. Foot passengers or passengers in wheelchairs who attempt to board vessels in that way might be all right once they are on the vessel, but they will still be challenged by getting on board.I went to the ferry terminal on Skye to go to Raasay last summer and took a photograph, which I am happy to supply to the committee, of the huge concrete slope that goes down quite steeply. It would let you understand what I have described. If somebody were to stand on that slope in a decent wind, they would need to have a strong person on either side to hold them up and stop them slipping.The two types of ferries that we are concerned about are those that are accessible only by a linkspan or by ramp. For the bigger ferries of that type, a conventional gangway for passengers is usually provided; CalMac often does that. Passengers who are fit can get up and down conventional gangways but, as you know, such gangways are affected by the tide and the tidal movements in some of our ports are very high. At certain states of the tide, therefore, the climb up the gangway is very steep. That is great for those of us who are good at getting up ladders and such like, but it is not much fun for people who have walking difficulties. Until we can devise and give advice on methods that do not require the use of conventional gangways and which use technology instead, as is the case on some ferries, it will always be difficult for certain people to get on and off ferries.The DPTAC guidance that I mentioned earlier refers to staff being available to assist people. However, we must remember that some of the smaller operations typically have two staff members on the ferry. The guidance also mentions terminal buildings, but lots of our ferries have no terminal building. The first responsibility of those two members of staff is the safety of the vessel. Vessels are not necessarily tied up—if a hard ramp is being used, the vessel is held against the ramp using the power of the engine. That means that someone has to stay on the bridge to operate the boat. It would be unrealistic to expect the other person on board to check the cars coming on and offer assistance to passengers who need it.I do not believe that enough work has been done to provide ferry operators with proper guidance on what they need to provide when they put on a new ferry. I do not believe that the new guidance answers those questions.